Doremi DCP-2000 Manual de usuario

D i a g n o s t i c T o o lUser ManualVersion 1.7DTL.OM.000169.DRM Page 1 Version 1.7Doremi Cinema LLC

5 Storage Tab5.1 Storage Tab Overview• The Storage tab consists of two sub-views: RAID Sub-View and Disk Sub-View (Figure8).Figure 8: Storage Tab Wi

• Second, the DISK Sub-View lists all the disks configured in the selected RAID.o Click on a Disk from the list on the left part of the GUI and the in

5.2 Storage Tab Features The RAID Sub-View lists all the RAIDs configured in the system and the information pertaining to each, such as:• An icon to

5.3 AnalyzeNote: To Analyse a RAID, the playback must be stopped. Any use of the drives during this process will give false alarms of the RAID and it

• If the RAID performance is not enough to support playback, this dialog below is displayed and the reason(s) are listed:Figure 15: Analyze Raid Perfo

• Select Disk Cleanup from the Analyze window.• The following window will appear (Figure 17):Note: A password confirmation window might appear.Figure

5.5 Repair • To repair a degraded RAID or to completely reinitialize a RAID, press the Repair button from the Storage tab.Note: The Repair feature al

Figure 21: Repair Window - Repair Disabled• After the RAID is repaired or replaced, the user will get a message stating that the RAID is now healthy.

5.6 Reinitialize a RAIDThe purpose of reinitializing a RAID is to reformat due to corrupted file systems. This process can take up to three hours dep

Figure 24: RAID Repair WindowFigure 25: RAID Repair WindowFigure 26: RAID Repair WindowDTL.OM.000169.DRM Page 19 Version 1.7Doremi Cinema LLC

Software License AgreementThe software license agreement can be found at the following location:http://www.doremilabs.com/support/cinema-support/cinem

6 Drive ReplacementThis section presents the procedure to apply when a drive needs to be replaced.6.1 Degraded RAID• The Storage tab will display th

Figure 28: Repair Window6.2 Drive Replacement – Step 1/4From the Repair window (Figure 28), click Continue. The Disk Replacement Wizard window will a

6.3 Drive Replacement – Step 2/4• Clicking the Continue button on the previous window will lead to the following window:Figure 30: Drive Replacement

6.4 Drive Replacement – Step 3/4In this step, the user will be prompted to insert a new drive at a specific position – corresponding to the faulty d

Figure 34: DCP-2000/DSV-J2 Vertical HDDs Bay Positions• For DCP-2K4 units (Figure 35):Figure 35: DCP-2K4 HDD Bay Positions6.4.2 Removing the Old Driv

6.4.3 Inserting a New Drive• Before inserting the drive, press on the blue button to release the gray handle and open it all the way until it clicks.

6.5 Drive Replacement – Step 4/4When the drive has been registered, a confirmation message indicating that the SATA drive replacement has been succes

6.6 Rebuild ProgressThe Storage tab will allow you to view the rebuild progress in the RAID Sub-View after you have replaced and inserted a new disk

Figure 41: Terminal Window• The wizard will ask you how many drives you want to have. Enter the number 4 followed by the Enter key (Figure 41).I MPOR

7 Managing a Drive7.1 Disable a Drive Presently, the only function of the Manage feature is to disable a drive. The purpose of this feature is to d

Table of Contents1 Introduction...

Figure 43: Storage Tab – Drive Disable Process Figure 44: Storage Tab – Drive Disable ProcessDTL.OM.000169.DRM Page 30 Version 1.7Doremi Cinema LLC

8 Hardware Tab8.1 Hardware Tab Overview• The Hardware tab provides information concerning the server itself, such as: Temperature, Voltage, Fans, Er

9 Media Block Tab9.1 Media Block Tab Overview• The Media Block tab is divided into three sections:• Projector Model:• Connection Status: Displays th

Figure 47: Media Block Tab - ConnectionDTL.OM.000169.DRM Page 33 Version 1.7Doremi Cinema LLC

10 Acronyms Term DefinitionCPL Composition PlaylistDCP Digital Cinema PackageECC Error Correction CodeGUI Graphical User InterfaceHDD Hard Disk Drive

11 Document Revision HistoryDate Version Description12/05/2006 1.0 First version.03/17/2009 1.1 All sections revised.01/13/2010 1.2 New storage tab GU

1 Introduction1.1 PurposeThe purpose of this document is to provide guidance on how to use the Diagnostic Tool application. The Diagnostic Tool appl

2 Diagnostic Tool User Interface2.1 Overview• To run the Diagnostic Tool application, go to the Menu of the server, then to Doremi Apps. and choose

3 Detailed Report3.1 Detailed Report OverviewTo generate a report log, please follow the steps below:Note: If possible, generate the report log whil

Figure 4: Confirmation Message• Remove the USB stick and send the report file to your local Doremi Technical Support Contact. DTL.OM.000169.DRM Page 7

4 System Tab4.1 System Tab OverviewThe System tab provides general information related to the server, such as: Serial Number, Software/Firmware Vers

Figure 7: System Tab - Playback in Pause ModeDTL.OM.000169.DRM Page 9 Version 1.7Doremi Cinema LLCPlayback in Pause mode